Input and
Measuring range |
Universal input
| Thermocouple K |
-200 to +1372°C (Resolution : 1°C)
-328 to +2501°F (Resolution : 1°F)
-199.9 to +999.9°C (Resolution : 0.1°C)
-199.9 to +999.9°F (Resolution : 0.1°F) |
| Thermocouple J |
-200 to +1200°C (Resolution : 1°C)
-328 to +2192°F (Resolution : 1°F)
-199.9 to +999.9°C (Resolution : 0.1°C)
-199.9 to +999.9°F (Resolution : 0.1°F) |
| RTD Pt100 |
-199.9 to +999.9°C (Resolution : 0.1°C)
-328 to +1562°F (Resolution : 1°F)
-199.9 to +850.0°C (Resolution : 0.1°C)
-199.9 to +999.9°F (Resolution : 0.1°F) |
* It is connected type "6C" connector made in RKC. |
| Sampling time |
0.5 sec. |
| Measuring accuracy |
± (0.1% of reading + 1digit) or ±0.3°C (Whichever is larger)
Cold-junction tempeature compensation error
 ± 0.5°C ( 5 to 40°C )
± 1.0°C ( -20 to 5°C, 40 to 50°C )
Ambient temperature influence
± 0.01% of span /°C ( 5 to 40°C )
± 0.02% of span /°C ( -20 to 5°C, 40 to 50°C) |
| Display |
Reflective FSTN LCD
Measuring value (PV) : 4-digit, Logging (Recording) No : 4-digit,
Total number of logging data : 4-digit, Message : 68 x 8 dots
Logging execution : Lit during execution
Burnout (Sensor broken) : Lit when the sensor is broken.
Remaining battery service life : The remaining battery service life
is indicated in three steps.
Temperature unit : 12 x 8 dots ( °C / °F ) |
Data logging
( recording ) |
| Recording method : |
Manual log mode : Can be manually recorded
in the memory.
Interval log mode : Can be automatically recorded
( in a set interval ) |
| Interval time : |
0 ( Manual mode), 1 to3600 sec. |
| Recording items : |
Measured temperature, Date, Time, Tag name,
User No. |
| Recording capacity : |
DP-700A : Max. 99 logs
DP-700B : Max. 9999 logs |
| Memory backup : |
DP-700A : Backed up by SRAM.
The recorded data may be lost if battery service life
has expired or the battery is replaced. |
|
DP-700B : Backed up by EEPROM
Number of writing : Approx. 100,000 times
Data retaining period : Approx. 10 yeares |
|
Temperature
gradient indication |
The evaluation points of high and low temperature are set.
When within the evaluation points, " " is displayed while when out of the
evaluation point, " " is displayed. |
Tag number
function |
| Number of maximum registration : |
DP-700A : 5 tags
DP-700B : 99 tags |
| Registration items : |
Tag name, evaluation points of high and low
temperature. |
| Tag neme : |
11 characters ( Numeral, Alphabets, Symbols ). |
| Memory backup : |
Same as Memory backup of data logging |
|
User name
function |
Any user name can be registered for each user number.
Logging data can store into register name.
Number of maximum registration : 99 names,
Number of character : 11 characters (Numeral, Alphabets, Symbols)
Memory backup: Same as Memory backup of data logging |
USB function
( Only for DP-700B ) |
Interface : USB (Universal Serial Bus) Ver2.0
Communication speed : Full Speed compliant
Connector type : USB series Mini-B
Power supply : Bus power
( The power is supplied from the USB port on the PC side. )
Device class: Mass Storage Class (Bulk-Only Transport) |
Waterproof and
dustproof |
DP-700A : IP67
DP-700B : IP54 |
| Other function |
Peak and bottom hold
PV bias : -99.9 to +99.9°C ( °F )
PV digital filter : 0 to 100 sec ( 0 : OFF )
Calender timer ( year, month, date, hour, minute )
Operation lock, Self-diagnostic |
| Power supply |
Type LR6 ( based on IEC and JIS ) alkaline battery, One battery
Battery life : Approx. 400 hours
( Continuous operating time, Around the ambient temperature 23°C ) |
| Ambient temperature |
-20 to +50°C |
| Ambient humidity |
5 to 95%RH ( Absolute humidity : Max. W.C 29g/m3 dry air at 101.3kPa ) |
| Weight |
Approx. 140g ( including LR6 Alkaline battery) |
| Accessories |
LR6 ( IEC and JIS ) Alkaline battery, Strap
USB cable 1m ( only DP-700B ) |
Specifications
