OP10 Compact Setting Display Unit for SRZ Series
| Home Page > SRZ > OP10 Compact Setting Display Unit > Specifications |
OP10 Specifications |
 |
|
Compact Setting Display Unit for Module type Digital Temperature Controller SRZ series |
||
Display |
|
| Display method | LCD display |
| Number of the figures | Upper section : 4 digits (Green) Lower section : 4 digits (Orange) |
Communication |
|
| Interface | Based on RS-485, EIA standard |
| Connection method | 2-wire system, half-duplex multi-drop connection |
| Synchronous method | Start / stop synchronous type |
| Communication speed | 4800 bps, 9600 bps, 19200 bps, 38400 bps |
| Data bit configuration | Start bit : 1 Data bit : 8 Parity bit : Without, Odd, Even Stop bit : 1 |
| Protocol | Modbus-RTU |
| Maximum connections | Z-TIO : 16 modules * OP10 cannot communicate with Z-DIO-A module. Z-COM-A : 16 units (However, up to 99 channels.) * The OP10 can be connected to a Z-TIO module with a Z-DIO module connected, however, it cannot be used to set or display data of the Z-DIO module. V-TIO-E/F : 16 units (However, up to 99 channels.) H-PCP-J : 16 units (However, up to 99 channels.) |
Power Supply |
|
| Power supply voltage | 85 to 264V AC [Include power supply voltage variation], 50/60Hz Rating : 100 to 240V AC 21.6 to 26.4V AC [Include power supply voltage variation], 50/60Hz Rating : 24V AC 21.6 to 26.4V DC [Include power supply voltage variation] Rating : 24V DC |
| Power consumption | 4VA Maximum (at 100V AC) , 7VA Maximum (at 240V AC) 4VA Maximum (at 24V AC) , 100mA Maximum (at 24V DC) |
Standard |
|
| Safety standard | UL : UL61010A-1, CSA : CAN/CSA-C22.2 No.1010.1 |
| CE marking | LVD : EN61010-1 OVERVOLTAGE CATEGORY II, POLLUTION DEGREE 2 EMC : EN61326 |
| C-Tick | AS/NZS CISPR11(equivalent EN55011) |
General Specifications |
|
| Power failure effect | A power failure of 20ms or less will not affect the action. |
| Memory backup | Backed up by non-volatile memory (EEPROM) |
| Number of writing | Approx. 100,000 times. |
| Allowable ambient temperature | 0 to 50°C |
| Allowable ambient humidity | 45 to 85%RH |
| Mounting method | DIN rail mounting socket or Panel mounted |
| Panel sealing | IP66 [Front panel] * Only panel mounted. |
| Weight | Approx. 120 g |
| External Dimensions |
| Unit : mm |
 |
| Socket (Order Separately) External Dimensions |
| DIN rail mounting type | Panel mounting type |
| Model : ATC180041 (Matsushita Electric Works, Ltd.) |
Model : AT78051 (Matsushita Electric Works, Ltd.) |
 |
 |
Mounting Hole Cutout Dimensions |
| Terminal Layout |
 |
 |
 1 to 9 terminals non-uses. * Communication has access to a connector of OP10 lower part. |
|
| DIN rail mounting type | Panel mounting type |
| OP10 top page | SRZ Series Module type Digital Temperature Controller |
| Home Page | SiteMap |
 |
RKC INSTRUMENT INC. |